Adjustable Alignment & Leveling Stand for Garmin Approach R10

Description

08/01/2022 Update -- As of August 1st, 2022, these stands are now made with higher temperature PETG plastic to prevent warping when using your Garmin R10 on a hot summer afternoon. PETG plastic can sustain temperatures of up to 165-170°F before it begins to soften.
This listing is for a 3D-printed Adjustable Alignment & Leveling Stand for the Garmin Approach R10 portable golf launch monitor.
Accurate data from the Garmin R10 starts with proper alignment of the launch monitor and this adjustable stand will help you achieve higher precision of your R10 placement. When I read the Tip from Garmin on page 4 of my R10 manual -- "You can lay a golf club on the ground between the alignment line and tee location to confirm they are lined up" -- I thought to myself, "I need to design something that will give me a more accurate and consistent set up each time I visit the driving range." Here it is.
Highlights/Features:
• Uses inexpensive fiberglass reflective rod (Not included) up to 8mm in diameter for visual alignment. You can find these at most big box hardware stores like Home Depot or Lowes for -4. (The yellow 48" one I use was .78 from Home Depot but they also carry a 72" version for .98).
• Integrated alignment rod holder stays low to the ground throughout the adjustment range so the alignment rod doesn't float in mid-air or require some sort of support on the other end.
• Integrated bullseye bubble level with 4-way angle markings provides visual leveling aid.
• Adjustment Knobs with M14 threads provides effortless adjustments.
• Slight footing indentations for the Garmin R10 help with consistent placement of your Garmin R10 onto the stand.
Available in two sizes:
• Standard - Adjustable range: 0.25" - 0.85"
• Extended - Adjustable range: 0.25" - 2"
Designed & Made in USA; Shipped from USA (California)
Important Notes:
• Stand and Adjustment Knobs are 3D printed and will have inevitable 3D printed surface blemishes.
• Do not leave it in a hot car on a very hot day.  The inside of a car parked in the sun can exceed 170
°F on a very hot summer afternoon.
• Garmin R10 launch monitor is Not included.
• Alignment stick / rod is Not included (again, I highly recommend using the fiberglass reflective rods at the big box hardware stores instead of the ones marketed for golf alignment as the latter is orders of magnitude more expensive than the former)
• I'm an avid golfer and may make improvements to the design so the unit you receive may have updated revisions not present at the time photos were taken.
• I only sell 3D printed products that I've designed from scratch.