Hejnar conversion 4 Manfrotto 410 arca kirk markins wimberley acratech rrs

Description

Hejnar Photo M405Rev0
PART M410 Long with F63 clamp
Please note that not all items shown on the pictures may be included in the   auction, and they are for presentation purposes only.  To determine   items for sale please see reference in the section "
Auction Includes
".
Description:
New Hejnar Photo conversion set for Manfrotto 410 gear head.  This combination of plate and clamp will let you use Manfrotto geared head with  any arca swiss equipment. Manfrotto gear head is more precise than ball head  and preferred by many photographers. Many architectural and interior  photographers actually prefer geared 3-axis tripod heads rather than ball heads  because they can make precision adjustments to each axis. Two popular heads are  Manfrotto 405 and 410 which each use Manfrotto QR plate. Arca-swiss plate fans  can now bypass this. Clamp can disconnected from plate and use independent on  other equipment if needed. Clamp can be positioned in relation to adapter plate  in 90 degree increments to make it convenient for everybody. Clamp can be mounted to adapter plate either with two or  three screws and will depends on clamp orientation
This is extended version of the plate. Clamp center is  located on Manfrotto 410 camera/lens mount axis and it is the same as the head  panning base. In other words, if you look down through the 3/8 mount hole on  the 410 it is the exact center of the bottom panning control. When the  head is panned both the head and camera/lens rotate around the same axis. For  distant subjects original Manfrotto arrangement for this gear head is just an  inconvenience. But for critical panoramic or most especially macro work  this is a killer and makes the 410 useless. Using this adapter plate/clamp combination  you can enjoy your pano and macro photography again.
Adapter plate is attached to Manfrotto geared head in two  simple steps.
1) removing lock down level with provided 3mm hex key.
2) Connect plate to geared head using one 1/4-20 screw and  one 10-32 screw.
More detail instruction can be fund
here
Clamp Specification:
3.25  inch long
Socket is countersunk on top for 1/4-20 screw but also threaded 3⁄8”-16.
Two set of outside holes are taped 1/4-20 and 45mm or 30 mm apart from each other.
Clamp includes two safety stop relief grooves. This prevents free fall when the clamp is not fully closed and your plate has safety stops
Clamp knob is captive. Knob stops at maximum opening — cannot be lost in the field.
Clamp knob is made from one piece. No spacers or bushing between knob and clamp itself. No room for dust,  sand etc to enter inside.
Precision C.N.C. machined from 6061-T6 Aluminium
Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates.
Stainless steel hardware.
Black hard coat anodized clamp and clear anodized knob.
Made in USA
Plate  Specification:
4.550 inch long.
2.560 inch wide.
0.625 inch thick.
Weight 3.6 oz (180g)
Auction Includes:
One adapter  plate.
One 3.25 inch clamp ( Model F63)
Two 1/4-20 x 3/4 screws.
Three 10-32 screws
Hex key for ¼-20 screw  10-32 screw and original level screw
If you prefer different clamp model let me know and i will ship clamp you requested.