Mercruiser Alpha, Bravo Alignment, Gimbal Puller, Installer, Seal, Bellow Tools

Description

The tube piece of the puller is a plain steel(not black oxided) at the moment
Made in the USA unlike the china ones being sold on here.
THIS IS FOR A NEW SET OF TOOLS:  ALIGNMENT TOOL,  GIMBAL BEARING DRIVER,  GIMBAL BEARING PULLER, SEAL DRIVER,  BELLOW RING DRIVER,  HINGE PIN TOOL, BELLOWS EXPANDER TOOL, PLUS EYE BOLT TO HANG THE ALIGNMENT TOOL.
ALIGNMENT TOOL.
FOR USE WITH: DRIVES 1,1A,1B,1C.ALL#1 DRIVES - ALL BRAVOS - GENERATION 2- PRE ALPHA "R"-ALPHA ONE - ALL COBRA STERNDRIVES - VOLVO SX.
MY ALIGNMENT TOOL IS A SOLID ONE PIECE, NOT 2 PIECES SCREWED TOGETHER (LIKE OTHER SOLD ON EBAY) THAT ARE GOING TO WIGGLE AROUND WHEN YOUR TRYING TO GET YOUR ALIGNMENT DEAD ON.
GIMBAL BEARING PULLER.
No more PIA hassles of slide hammer jaws not grabbing and busted knuckles. This tool makes pulling the bearing easy.  We have big name Marina's using these.
This blind hole puller locks into the inner race of the bearing.
To pull you just turn the end of the tool with a wrench, Its that easy.
Comes with instructions on how to use the tool behind the shipping label.
Comes with a storage tube for the threaded rod.
GIMBAL BEARING INSTALL TOOL.
THIS WORKS FOR
ALL BRAVOS, OMC COBRAS, ALL  #1 DRIVES MADE FROM 1966 TO NOW INCLUDING PRE ALPHA(R),   ALPHA 1 "MR" AND GEN 2.
GREASE SEAL INSTALL TOOL.
DRIVE SHAFT BELLOW SLEEVE INSTALL TOOL,(NOW IN BLACK MADE OF DELRIN).  THIS INSTALLS THE ALUMINUM RING INTO THE ALPHA 1 GEN2, BRAVO, BLACKHAWK U-JOINTS BELLOWS.
BELLOWS EXPANDER TOOL. This tool is designed to stretch out the exhaust bellow on Mercruiser Outdrives.
Replaces: 91-45497A  & 90360
REAL HINGE PIN TOOL INCLUDED
: REPLACES MERCURY PART NUMBER 91-78310
FOR ALL MERCUISER STRENDRIVES: ALPHA ONE, ALPHA ONE GEN TWO, BRAVO ONE, BRAVO TWO, BRAVO THREE, MC-1, R, MR.
THIS SET HAS A MADE IN THE USA EYE BOLT THAT SCREWS INTO THE END OF IT SO IT CAN BE HUNG ON A WALL.
WE HAVE OTHER BOAT PARTS, TOOLS AND BELLOW SETS W/ TOOLS IN OUR EBAY STORE AND OFFER COMBINED SHIPPING:
Visit My eBay Store: Whoya Products
GIMBAL BEARING INSTALL TOOL COMES WITH DIRECTIONS ON WHERE TO DRILL THE HOLE IN THE ALIGNMENT TOOL.
PEOPLE HAVE BEEN ASKING IF THE ALIGNMENT TOOL CAN BE PRE DRILLED BEFORE BUYING. SORRY NO BECAUSE OF THE DIFFERENT COUPLERS .
This ships insured and is included in the price.
YOU DO NOT HAVE TO WORRY ABOUT THE TOOL BEING LOST BY THE SHIPPING COMPANY AND LOSING OUT ON THE TOOL AND TIME,  I WILL CONTACT UPS AND IF ITS LOST(NOT DELIVERED) I WILL SEND OUT ANOTHER ONE IMMEDIATELY AT NO ADDITIONAL CHARGE.
THIS IS A SOLID PIECE OF STEEL. THIS IS A LIFETIME TOOL THAT WILL LAST LONGER THEN YOU.
THIS COMES WITH INSTRUCTIONS AND A PICTORIAL. THIS ALSO HAS HELPFUL TIPS INCLUDED TO MAKE IT EASIER.  YOU DON'T HAVE TO ASK FOR IT TO BE EMAILED TO YOU LIKE OTHER SELLERS HERE.
INSTRUCTIONS/PICTORIAL ARE IN PACKING LIST BEHIND SHIPPING LABEL.
GREAT ITEM TO HAVE IN THE GARAGE/SHOP.
THIS IS USED TO CHECK ENGINE COUPLER ALIGNMENT WITH THE GIMBAL BEARING AND DRIVE.
PROPER ALIGNMENT PREVENTS WEAR ON THE BEARING,DRIVE AND COUPLER.
FOR USE WITH DRIVES 1,1A,1B,1C.ALL#1 DRIVES - ALL BRAVOS - GENERATION 2- PRE ALPHA "R"-ALPHA ONE - ALL OMC COBRA
STERNDRIVES
- VOLVO SX.
THE DRIVE ALIGNMENT IS SUPPOSED TO BE CHECKED ANNUALLY AT MINIMUM
EVERY TIME
YOU HAVE THE DRIVE OFF YOU SHOULD CHECK ALIGNMENT OR IF YOU HAVE PULLED OR ADJUSTED THE ENGINE.
THIS TOOL CAN SAVE YOU COSTLY DRIVE REPAIRS.
Free shipping is for only in the lower 48 US states.
THIS ALWAYS SHIPS OUT NEXT BUSINESS DAY.  MOST DAYS WE CAN GET IT OUT THE SAME DAY.
WE HAVE THE BEST/FASTEST SHIPPING AND BUY IN CONFIDENCE AS WE HAVE A 100% FEEDBACK RATING.
A TRACKING NUMBER WILL SHOW UP IN YOUR EBAY UNDER THE BOUGHT ITEM, YOU JUST CLICK ON THE NUMBER TO TRACK.
THANKS FOR LOOKING/BUYING.